David Rihtaršič

2 Disk partitioning

V bistvu imam dve particji

sda1 = boot
sda2 = root =/

nato pa še en disk sdb mauntam v Files. Tam imam shranjene vse moje pomembnejše datoteke… mogoče bi bilo bolje, da bi imel cel /home na svojem disku… ker sedaj ne vem kako bo s ključnimi datotekami kot so: .zshenv, .xprofile…

skratka izgleda takole:

NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 238.5G  0 disk 
├─sda1   8:1    0   512M  0 part /boot
└─sda2   8:2    0   238G  0 part /
sdb      8:16   0 256.2G  0 disk 
└─sdb1   8:17   0 256.2G  0 part /home/david/Files

Format USB device

sudo fdisk /dev/sdc

Welcome to fdisk (util-linux 2.38.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command.

The device contains ‘vfat’ signature and it will be removed by a write command. See fdisk(8) man page and –wipe option for more details.

Command (m for help): p

Disk /dev/sdc: 14.89 GiB, 15987638272 bytes, 31225856 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000

Command (m for help): n

Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p):

Using default response p. Partition number (1-4, default 1): First sector (2048-31225855, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-31225855, default 31225855):

Created a new partition 1 of type ‘Linux’ and of size 14.9 GiB.

Command (m for help): p

Disk /dev/sdc: 14.89 GiB, 15987638272 bytes, 31225856 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000

Device Boot Start End Sectors Size Id Type /dev/sdc1 2048 31225855 31223808 14.9G 83 Linux

Command (m for help): w

The partition table has been altered. Calling ioctl() to re-read partition table. Syncing disks.

Command (m for help): q

lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 238.5G 0 disk ├─sda1 8:1 0 512M 0 part /boot └─sda2 8:2 0 238G 0 part / sdb 8:16 0 256.2G 0 disk └─sdb1 8:17 0 256.2G 0 part /home/david/Files sdc 8:32 1 14.9G 0 disk └─sdc1 8:33 1 14.9G 0 part

sudo mkfs.vfat -F 32 /dev/sdc1

mkfs.fat 4.2 (2021-01-31)

UREJENOST DIRECTORY-EV

Potovanja

Uredi potovanja po posameznih potovanjih npr.: 2022_10-STE22_Porto in v ta dir. dodaš vse elemente, ki temu dogodku pripadajo.

2022NOVO_POTOVANJE ├── 01_Voga_za_odobritev_odsotnosti │ └── 01<++>—Vloga_za_odobritev_odsotnosti_Rihtaršič_<++>.pdf ├── 02Povpraševanje_Nakup_Letalska │ ├── 02_Besedilo-maila.md │ └── 02_Povprasevanja_za_nakup_letalskih_kart_2021.pdf ├── 03_Predlog_za_izdajo_naročilnice │ └── 03_ePDF_predlog_za_izdajo_narocilnice_2020-v1.71N__nezascitena_polja.pdf ├── 04_Poročilo_in_priloge │ ├── 04_Poročilo_in_priloge.md │ └── 04_Poročilo_in_priloge.pdf └── 05_Obračun_potnega_naloga

Dilema je bila ali naj bodo dir. urejeni tako, da so vsi: vloge, povpraševanja, naročilnice, … skupaj, saj se lahko potem hitro copy-paste in spremeniš za drugo situacijo… Vendar težava nastane, ko imaš na neki poti nestandarden postopek npr.: preklic letalske karte, odpoved poti…